HIU & Communal Heating
HIU Plate Heat Exchanger Replacement in London & the M25
A scaled HIU plate exchanger cannot be cleaned in place on brazed units, so we supply and fit the correct replacement and prove the DHW output. We cover hiu plate heat exchanger replacement for homeowners, landlords, managing agents and commercial sites across every London borough and the wider M25. Engineer time is £120+VAT per hour with a one hour minimum, and parts are always quoted in writing before they are fitted.
Quick answer
Who provides hiu plate heat exchanger replacement in London, and what does it cost?
London HVAC Pro provides hiu plate heat exchanger replacement in London and the M25 using F-Gas certified engineers. Engineer time is £120+VAT per hour with a one hour minimum and no call-out fee, parts are quoted in writing before fitting, and same-day attendance is usually available. Call 07427 826446 to book.
More answers: faults and causes, service costs, areas we cover.
HIU Plate Heat Exchanger Replacement explained
A scaled HIU plate exchanger cannot be cleaned in place on brazed units, so we supply and fit the correct replacement and prove the DHW output.
- Scale and silt fouling: Water condition, cleaning and equipment suitability should be checked against the manufacturer’s requirements.
- Flow and return delta T: Distinguish a pump fault from air, restrictions or closed valves elsewhere in the circuit.
- Gasket or brazed plate type: Closure and seal contact should be checked together; a new gasket will not correct a misaligned door.
- Post-swap flow test: Distinguish a pump fault from air, restrictions or closed valves elsewhere in the circuit.
Interpreting the reported fault
Confirm the old component identification, required duty and connection compatibility. Establish why it failed before replacing it. Where the application has changed, a like-for-like replacement may reproduce the same problem.
- Reported symptom: hot water that has gradually got weaker and cooler over months
- Record when the problem started and any recent changes
- Keep fault codes and model details for the assessment
Like for like still needs checking
Confirm the old component identification, required duty and connection compatibility. Establish why it failed before replacing it. Where the application has changed, a like-for-like replacement may reproduce the same problem.
- Confirm equipment model and access before the visit
Labour and the work to be agreed
Engineer time is £120+VAT per hour with a one hour minimum. The time and materials required depend on the diagnosed fault and access. Ask for the repair scope, any additional parts and the return-to-service checks before proceeding.
- £120+VAT per hour, one hour minimum
- Confirm the parts and labour required for the specific fault
HIU Plate Heat Exchanger Replacement across London
Related hiu & communal heating services
These faults often appear together — each service has its own page with costs and what we check.
HIU Servicing
The usual trigger for a call is an annual service due under the block maintenance schedule. Other signs worth …
Heat Interface Unit Servicing Contract
The usual trigger for a call is a block needing scheduled HIU maintenance across many flats. Other signs worth…
HIU Control Valve Replacement
The usual trigger for a call is heating or hot water stuck permanently on or permanently off. Other signs wort…
HIU Actuator Replacement
The usual trigger for a call is an actuator that buzzes, sticks or shows no drive. Other signs worth acting on…
HIU Strainer Cleaning
The usual trigger for a call is reduced flow and poor hot water caused by network debris. Other signs worth ac…
HIU No Hot Water
The usual trigger for a call is no hot water at all from a communal heating flat. Other signs worth acting on …
HIU No Heating
The usual trigger for a call is radiators cold while hot water still works, or both cold. Other signs worth ac…
Communal Heating Repair
The usual trigger for a call is a block with intermittent heating complaints across several flats. Other signs…
See every service on our plumbing and mechanical services index, or read about underfloor heating repair London.
Book hiu plate heat exchanger replacement in London
Tell us what the system is doing and we will send an engineer with the right parts. £120+VAT per hour, one hour minimum.
Call 07427 826446Frequently Asked Questions
What's included in HIU Plate Heat Exchanger Replacement
- Identification of the existing component or unit
- Check of why the original failed
- Compatibility of duty and connections confirmed
- Replacement and commissioning checks
- Written record of the change
- Refrigerant handling by F-Gas certified engineers, with records kept
How HIU Plate Heat Exchanger Replacement works
- 1
Identify the item
Share the model and rating details, or a photo of the data plate.
- 2
Check the cause
The engineer establishes why the original failed.
- 3
Written quote
The replacement is quoted in writing before ordering.
- 4
Fit and commission
The replacement is fitted and tested.
- 5
Record
The change is recorded for future servicing.
HIU Plate Heat Exchanger Replacement prices
| Item | Price |
|---|---|
| Engineer labour | £120 + VAT per hour |
| Minimum charge | One hour |
| Parts and materials | Written quote before work starts |
| Installation or replacement | Fixed written quote after survey |
See all rates on our prices page or read why customers choose us.
HIU Plate Heat Exchanger Replacement: scope, checks and next steps
A scaled HIU plate exchanger cannot be cleaned in place on brazed units, so we supply and fit the correct replacement and prove the DHW output.
What the reported symptom tells us
hot water that has gradually got weaker and cooler over months. Record when this occurs, what changed beforehand and whether other equipment is affected. These observations narrow the investigation; they do not prove which part has failed.
Like for like still needs checking
Confirm the old component identification, required duty and connection compatibility. Establish why it failed before replacing it. Where the application has changed, a like-for-like replacement may reproduce the same problem.
What each check helps establish
- Scale and silt fouling
- Water condition, cleaning and equipment suitability should be checked against the manufacturer’s requirements.
- Flow and return delta T
- Distinguish a pump fault from air, restrictions or closed valves elsewhere in the circuit.
- Gasket or brazed plate type
- Closure and seal contact should be checked together; a new gasket will not correct a misaligned door.
- Post-swap flow test
- Distinguish a pump fault from air, restrictions or closed valves elsewhere in the circuit.
Related fault and service guidance
Hiu plate heat exchanger replacement: common questions
- How much does hiu plate heat exchanger replacement cost?
- Hiu plate heat exchanger replacement from londonhvacpro is charged from £120+VAT per hour with a one-hour minimum and no call-out fee. Any parts are quoted in writing before work starts.
- How quickly can you attend for hiu plate heat exchanger replacement?
- We offer same-day attendance and 24/7 emergency callout across London and the M25. Call 07427 826446 to book an engineer for hiu plate heat exchanger replacement.
- Are your engineers certified for hiu plate heat exchanger replacement?
- Yes. All refrigeration and air conditioning work is carried out by F-Gas certified engineers in line with the F-Gas Regulations, with every visit documented.