Water Leak Detection
Thermal Imaging Leak Detection in London & the M25
Thermal imaging traces warm pipe routes and wet areas under finishes, producing an annotated photo report you can give an insurer. We cover thermal imaging leak detection for homeowners, landlords, managing agents and commercial sites across every London borough and the wider M25. Engineer time is £120+VAT per hour with a one hour minimum, and parts are always quoted in writing before they are fitted.
Quick answer
Who provides thermal imaging leak detection in London, and what does it cost?
London HVAC Pro provides thermal imaging leak detection in London and the M25 using F-Gas certified engineers. Engineer time is £120+VAT per hour with a one hour minimum and no call-out fee, parts are quoted in writing before fitting, and same-day attendance is usually available. Call 07427 826446 to book.
More answers: faults and causes, service costs, areas we cover.
Thermal Imaging Leak Detection explained
Thermal imaging traces warm pipe routes and wet areas under finishes, producing an annotated photo report you can give an insurer.
- Calibrated thermal camera: Confirm the component identity and model-specific requirements before deciding whether adjustment, testing or replacement is appropriate.
- Heating circuit tracing: Confirm the component identity and model-specific requirements before deciding whether adjustment, testing or replacement is appropriate.
- Temperature differential analysis: Confirm the component identity and model-specific requirements before deciding whether adjustment, testing or replacement is appropriate.
- Annotated photo report: Confirm the component identity and model-specific requirements before deciding whether adjustment, testing or replacement is appropriate.
Interpreting the reported fault
Inspection, routine maintenance, fault diagnosis and installation answer different questions. Describe the equipment and the outcome needed so the visit can be scoped appropriately rather than treating every request as a replacement job.
- Reported symptom: needing a survey that will not damage finishes or flooring
- Record when the problem started and any recent changes
- Keep fault codes and model details for the assessment
Choose the right service scope
Inspection, routine maintenance, fault diagnosis and installation answer different questions. Describe the equipment and the outcome needed so the visit can be scoped appropriately rather than treating every request as a replacement job.
- Confirm equipment model and access before the visit
Labour and the work to be agreed
Engineer time is £120+VAT per hour with a one hour minimum. The time and materials required depend on the diagnosed fault and access. Ask for the repair scope, any additional parts and the return-to-service checks before proceeding.
- £120+VAT per hour, one hour minimum
- Confirm the parts and labour required for the specific fault
Thermal Imaging Leak Detection across London
Related water leak detection services
These faults often appear together — each service has its own page with costs and what we check.
Water Leak Detection
The usual trigger for a call is a rising water bill, damp patch or pressure loss with no visible source. Other…
Underground Water Leak Detection
The usual trigger for a call is a supply pipe leak in a garden, drive or under a path. Other signs worth actin…
Hidden Water Leak Detection
The usual trigger for a call is damp appearing on a ceiling or wall with no obvious cause. Other signs worth a…
Acoustic Leak Detection
The usual trigger for a call is a leak audible in the system but impossible to place. Other signs worth acting…
Non Destructive Leak Detection
The usual trigger for a call is wanting the leak found without lifting floors speculatively. Other signs worth…
Central Heating Leak Detection
The usual trigger for a call is a boiler losing pressure with no visible drips. Other signs worth acting on ea…
Mains Water Leak Detection
The usual trigger for a call is the water meter turning with everything switched off. Other signs worth acting…
See every service on our plumbing and mechanical services index, or read about underfloor heating repair London.
Book thermal imaging leak detection in London
Tell us what the system is doing and we will send an engineer with the right parts. £120+VAT per hour, one hour minimum.
Call 07427 826446Frequently Asked Questions
Engineer labour from £120 + VAT per hour, with a 1-hour minimum. Parts and materials are quoted separately before work begins.
What's included in Thermal Imaging Leak Detection
- Review of the equipment and the outcome needed
- Inspection of condition and operation
- Recommendation of the right service scope
- Written quote before chargeable work
- Record of findings
- Refrigerant handling by F-Gas certified engineers, with records kept
How Thermal Imaging Leak Detection works
- 1
Contact us
Describe the equipment and what you need it to do.
- 2
Visit
An engineer inspects the equipment and its operation.
- 3
Recommendation
The right scope is recommended: servicing, repair or installation.
- 4
Written quote
Any chargeable work is quoted before it starts.
- 5
Work and record
Approved work is carried out and recorded.
Thermal Imaging Leak Detection prices
| Item | Price |
|---|---|
| Engineer labour | £120 + VAT per hour |
| Minimum charge | One hour |
| Parts and materials | Written quote before work starts |
See all rates on our prices page or read why customers choose us.
Thermal Imaging Leak Detection: scope, checks and next steps
Thermal imaging traces warm pipe routes and wet areas under finishes, producing an annotated photo report you can give an insurer.
What the reported symptom tells us
needing a survey that will not damage finishes or flooring. Record when this occurs, what changed beforehand and whether other equipment is affected. These observations narrow the investigation; they do not prove which part has failed.
Choose the right service scope
Inspection, routine maintenance, fault diagnosis and installation answer different questions. Describe the equipment and the outcome needed so the visit can be scoped appropriately rather than treating every request as a replacement job.
What each check helps establish
- Calibrated thermal camera
- Confirm the component identity and model-specific requirements before deciding whether adjustment, testing or replacement is appropriate.
- Heating circuit tracing
- Confirm the component identity and model-specific requirements before deciding whether adjustment, testing or replacement is appropriate.
- Temperature differential analysis
- Confirm the component identity and model-specific requirements before deciding whether adjustment, testing or replacement is appropriate.
- Annotated photo report
- Confirm the component identity and model-specific requirements before deciding whether adjustment, testing or replacement is appropriate.
Related fault and service guidance
Before your engineer visits
- Note the fault code shown on the display.
- Photograph the rating plate so we can identify the model and refrigerant.
- Write down when the problem started and whether it is constant or intermittent.
- Clear access to the indoor unit, condenser or plant area.
- Move stock out of failing fridges or cold rooms into a working unit if you can.
- Check the isolator and circuit breaker without opening any electrical panels.
- Tell us about roof, ladder, permit or out-of-hours access requirements when you book.