24/7 Emergency: 07414 254125
REFCOM · F-Gas Certified
Walk-in cold room interior with stainless shelving and evaporator unit

Egham · TW20 · Commercial Refrigeration

Cold Rooms Egham

Design, supply, install and repair of modular walk-in cold rooms and freezers — for kitchens, butchers, florists, pharma and supermarkets. From 4m² prep rooms to large warehouse cold stores. Serving Egham and surrounding TW20 postcodes — same-day attendance, 24/7 emergency callout.

REFCOM & F-Gas certified24/7 emergency callout£120+VAT/hr · 1 hr minimum

Cold Room Install & Repair for businesses in Egham

Design, supply, install and repair of modular walk-in cold rooms and freezers — for kitchens, butchers, florists, pharma and supermarkets. From 4m² prep rooms to large warehouse cold stores. Our engineers cover the whole of Egham and the wider TW20 postcode area, serving offices, restaurants, retail, hospitality and healthcare clients across the borough.

Every cold rooms job in Egham is carried out by F-Gas certified engineers, using calibrated tools and OEM parts. You get a written quote before any chargeable work, a 12-month workmanship guarantee, and a clear F-Gas logbook entry where the system requires it. We're the teamEgham businesses call when downtime is not an option — from a one-off breakdown to a long-term planned maintenance contract.

Looking for Cold Room Install & Repair across all London areas? We cover the entire M25 region.

What's included — Cold Rooms in Egham

Modular panel cold room design & install

Refrigeration pack & condenser sizing

Door, hinge and gasket replacement

Defrost circuit, heater and timer faults

Temperature monitoring & alarm systems

Emergency repair to prevent stock loss

Brands we service in Egham

FosterCarrierBitzerCopelandSearleKelvion

Other commercial refrigeration services in Egham

Same engineers, same response times, dedicated landing page for each service in Egham TW20.

Also available in Egham

Cold Room Install & Repair in other covered areas

We cover the surrounding home counties — each with a dedicated cold rooms page.

← See all services available in Egham TW20

Cold Rooms FAQs — Egham

Need cold rooms in Egham today?

Speak to a Egham engineer now. £120 + VAT/hr (min 1 hr) · same-day attendance · written quote before chargeable work.

Cold Room Install & Repair: scope, checks and next steps

A cold room is a combined enclosure and refrigeration system. Panel insulation, door seals and warm-air entry can undermine otherwise functioning plant.

Separate the possible causes

Compare room temperature with the setpoint; inspect the door, evaporator airflow, defrost sequence and drainage. Repeated icing requires a cause to be found, rather than repeated manual ice removal.

Repair or replacement?

An enclosure repair, control repair and full plant replacement are different scopes. Check panel condition, storage duty and recovery after door openings before specifying new refrigeration.

Repair the existing system or plan a new installation?

For a breakdown, establish the fault and condition of the existing equipment first. For new installation, define the required duty, available space and connections. Do not compare a component repair price with an equipment-only purchase price: compare complete scopes and the performance each would deliver.

See the wider equipment service →

What each check helps establish

Modular panel cold room design & install
Damage or moisture can change heat gain; assess the enclosure as well as the mechanical plant.
Refrigeration pack & condenser sizing
Condition and airflow affect heat transfer; look beyond surface appearance to obstruction and operating performance.
Door, hinge and gasket replacement
Closure and seal contact should be checked together; a new gasket will not correct a misaligned door.
Defrost circuit, heater and timer faults
Check the control sequence and termination as well as whether the element can operate.

Details to include with your job request

Provide room dimensions, contents, temperature history, alarm records and photographs of the evaporator and door. Mention where the condenser is located and how it can be accessed.

Site details for Egham

Egham, Berkshire — postcode reference TW20. Give the complete site postcode, not just the area name, and confirm who can provide access to the equipment. For shared or roof-mounted plant, explain the access arrangements and any landlord or building-management permissions needed.

Dedicated services in Egham

    Before your engineer visits

    • Note the fault code shown on the display.
    • Photograph the rating plate so we can identify the model and refrigerant.
    • Write down when the problem started and whether it is constant or intermittent.
    • Clear access to the indoor unit, condenser or plant area.
    • Keep previous service sheets and F-Gas leak-check records ready for the engineer.
    • Tell us about roof, ladder, permit or out-of-hours access requirements when you book.